Latest Products
Sort by
Show result

**Tool features**
.Convenient lock-on switch for both right and left hand users
.Parking shoe - No harm to wood surface
.2 pcs resharpable HSS blades for lower maintenance cost
.Robust plate with 3 V groove
.Ergonomic handle for comfort holding during planning

**Specification**
Rated input power 650 W
Planing width 82 mm
Cutting depth 0 – 2,6 mm
Weight 2.8 kg
Adjustable rebating depth 0 – 9 mm
No-load speed 16,500 rpm
Tool dimensions (width) 158 mm
Tool dimensions (length) 280 mm
Tool dimensions (height) 140 mm

**Scope of delivery**
0 601 596 0L0 comes complete with:
Allen key
Parallel guide
Carton box
Sharpening device for HSS blade
Setting gauge for HSS blade

RM325.00

**Applications**
.SCALA2 is the perfect choice for residential buildings with up to 3 floors and 8 taps.
.Boosting from mains: Increases the water pressure delivered by city mains
.Boosting from tanks: Increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks.
.Boosting from wells: Pumps water from a depth of 8 metres
.Suitable for both Indoor and outdoor installation X4D and Enclosure type 3(US).

**Specifications**
Model SCALA2 3-45
Voltage 240 V 50 Hz
Power 550 W
Current 2.3 - 2.8 A
Rated flow 3 m³/h
Rated head 27 m
Head max 45 m
Max. ambient temperature 131°F (55°C)
Max. liquid temperature 113°F (45°C)
Max. system pressure 145 PSI (10 bar)
Max. inlet pressure 87 PSI (6 bar)
Max. head 148 ft (45 m)
Enclosure rating NEMA 3
Pipe connection thread NPT 1"
Pumped liquid Clean, fresh water and chlorinated water < 300 ppm.
IP rating X4D (outdoor installation)
Floors Max. 3
Taps Max. 8
Dimensions H302 x L403 x W193 mm
Weight 10 kg
Warranty 2 years

RM2,499.00

" Fast & Reliable" - The NEW Chipping Specialist!
.Greater efficiency: High impact energy coupled with higher impact rate resulting in 10% higher chipping output
.Extended durability: Patented grease sealing ring to prevent leakage; improved dust cap for better dust proof with easy chisel fixing/removing
.Less fatigue: Lowest vibration in its class to ensure ease of operation thanks to well designed damping ring system

**Technical data**
Rated input power 1,100 W
Impact rate at rated speed 2,900 bpm
Impact energy (according to EPTA 05/2016) 7.8 J
Tool holder HEX 17 mm
Tool dimensions (width) 103 mm
Tool dimensions (length) 458 mm
Tool dimensions (height) 235 mm
Weight 5.6 kg
Warranty 6 months

**Scope of delivery**
Part number 0 611 338 6L0 (Gen 2)
GSH 500 Professional comes complete with:
1 x pointed chisel, 280mm x 17 mm hex shank,
Carrying case

RM750.00

" Fast & Reliable" - The NEW Chipping Specialist!
.Greater efficiency: High impact energy coupled with higher impact rate resulting in 10% higher chipping output
.Extended durability: Patented grease sealing ring to prevent leakage; improved dust cap for better dust proof with easy chisel fixing/removing
.Less fatigue: Lowest vibration in its class to ensure ease of operation thanks to well designed damping ring system

**Technical data**
Rated input power 1,100 W
Impact rate at rated speed 2,900 bpm
Impact energy (according to EPTA 05/2016) 7.8 J
Tool holder HEX 17 mm
Tool dimensions (width) 103 mm
Tool dimensions (length) 458 mm
Tool dimensions (height) 235 mm
Weight 5.6 kg
Warranty 6 months

**Scope of delivery**
Part number 0 611 338 6L0 (Gen 2)
GSH 500 Professional comes complete with:
1 x pointed chisel, 280mm x 17 mm hex shank,
Carrying case

RM750.00

**Features**
.Single suction centrifugal pump, with high efficiency
.Copper impeller, stable performance
.High head, small flow rate

**Technical data**
Brand Preco
Model CPM-158
Voltage 230V 50Hz single phase
Power 0.75kW / 1.0Hp
Current 5.2A
Max. capacity 120L/min / 7.2m3/hour
Max. head 28m
Max. suction lift 9m
Speed 2850r/min
Inlet & discharge size 1-inch x 1-inch / 25mm x 25mm
Protection IPX 4
Insulation Class B
Capacitor 450V / 20uF
Continuous duty and thermally protected
Recognized standard ISO 9001
Weight 15kgs
Warranty 6 months

RM350.00

**Features**
.Pressure adjustable function and low noise mode
.Pressure adjustable function for easy and quick control by turning the handle
.Low noise mode enables soft washing of screen door, air conditioner outdoor unit, car, etc
.Makita-built powerful 1,800 W series motor provides up to 13 MPa (130 bar) for maximum cleaning power
.450 L/hr max flow rate
.Powerful washing 11 MPa (110 bar) of working pressure (up to 55X as tap water)
.Integrated hose reel for easy storage
.Lightweight and compact, middle class power washer for home and professional use
.Low noise thanks to anti-vibration structure
.Eco-friendly for reduced water
.Uses up to 80% less water than a garden hose while delivering up to 55X the pressure
.Long, superflex, scratch-proof, anti-kink 10 m high pressure hose for various applications
.Self-priming function supplies water from a tank or reservoir instead of a faucet
.Ideal for cleaning of motorcycles, garden furniture and balconies
.IPX5 rated for weather and water resistance
.Handle and rear wheels for easy mobility
.On-board storage for straightforward setup and accessory storage
.Cyclone Guard for preventing from water splash
.Foam Nozzle for foaming the detergent and splashing the bubble. Under Body Spray Lance for washing the bottom of cars / tractors/ cultivators, etc. Accessory Joint for using the accessories of HW112 / HW121. .Double insulated

**Technical specifications**
Model HW1300
Regular pressure 110bar (Hi) / 80bar (Lo)
Max pressure 130bar / 1,885psi
Flow rate 450L/hour
Motor type Makita W-series
Hose length 10m
Inlet water temp max 40°C
Overall dimensions 830mm (H)
Net weight 12.7kg
Continuous rating input 1,800W
Power supply cord 5.0m
Warranty 12 months

**Standard equipment**
Trigger Gun Set
Foam Nozzle Set
Vario Spray Lance Set
Cyclone Jet
High Pressure Hose 10m
Garden Hose Fitting
Pump Outlet Hose Fitting
Cleaning Pin

RM1,450.00

**Features**
.Using perfect solution for polishing paintwork, surface finishing, waxing and descaling
.Variable speed and slow smooth start-up
.Constant speed function: infinitely variable speed between 2100-5000 rpm ensures work at the right speed
.Externally accessible brushes for greater serviceability and longer motor life
.Soft grip for comfortable use
.Extremely easy to use even for inexperienced operators, swirl-free, professional results with no risk
.Big orbit 21mm high effective for polishing

**Specifications**
Model DSP150
Voltage 240V 50Hz
Power 720W
Speed electronic variable speed
No load speed 2100-5000rpm
Pad size (6") 150mm
Eccentric orbit 21mm
Protective type double insulation
Protection Class II
Warranty 6 months

**Standard Accessory**
1pc 150mm polishing sponge pad
1pc S6 hex wrench
1pair of carbon brush

RM309.00

**Features**
.Japanese Standard Quality (Environment-Friendly Design)
.Reliable, Long-Lasting Safety (Reliable, Advanced Motor)
.Constant Water Pressure (Life-Extending Pressure-Stabilized Unit)
.Big Water Capacity (Increased by up to max. 22%)
.Quiet Operation (Reduced by up to max. 10dB)

**Specifications**
Brand Hitachi
Series Compact Type
Model WM-P300XS
Motor Watt 300W
Total Suction Head 8m
Total Discharge Head 18m
Capacity 51L/min
Max. Capacity 61L/min
Pressure Switch (On: 2.0kg/cm2 / Off: 2.6kg/cm2)
Suction Pipe 25mm (1-inch)
Noise Level 48dB
Discharge Pipe 25mm (1-inch)
Taps Used Simultaneously (6 Average)
Elevation Difference 2m
Dimensions W354 × L312 × H320mm
Net Weight 13kg
Gross Weight 14kg
1 years general warranty
5 years on motor warranty

RM1,350.00

**Features**
.Japanese Standard Quality (Environment-Friendly Design)
.Reliable, Long-Lasting Safety (Reliable, Advanced Motor)
.Constant Water Pressure (Life-Extending Pressure-Stabilized Unit)
.Big Water Capacity (Increased by up to max. 22%)
.Quiet Operation (Reduced by up to max. 10dB)

**Specifications**
Brand Hitachi
Series Compact Type
Model WM-P250XS
Motor Watt 250W
Total Suction Head 8m
Total Discharge Head 18m
Capacity 47L/min
Max. Capacity 59L/min
Pressure Switch (On: 2.0kg/cm2 / Off: 2.6kg/cm2)
Suction Pipe 25mm (1-inch)
Noise Level 49dB
Discharge Pipe 25mm (1-inch)
Taps Used Simultaneously (5-6 Average)
Elevation Difference 2m
Dimensions W354 × L312 × H320mm
Net Weight 13kg
Gross Weight 14kg
1 years general warranty
5 years on motor warranty

RM1,270.00

**Features**
.Japanese Standard Quality (Environment-Friendly Design)
.Reliable, Long-Lasting Safety (Reliable, Advanced Motor)
.Constant Water Pressure (Life-Extending Pressure-Stabilized Unit)
.Big Water Capacity (Increased by up to max. 22%)
.Quiet Operation (Reduced by up to max. 10dB)

**Specifications**
Brand Hitachi
Series Compact Type
Model WM-P200XS
Motor Watt 200W
Total Suction Head 8m
Total Discharge Head 14m
Capacity 43L/min
Max. Capacity 55L/min
Pressure Switch (On: 1.6kg/cm2 / Off: 2.2kg/cm2)
Suction Pipe 25mm (1-inch)
Noise Level 48dB
Discharge Pipe 25mm (1-inch)
Taps Used Simultaneously (5 Average)
Elevation Difference 2m
Dimensions W354 × L312 × H320mm
Net Weight 13kg
Gross Weight 14kg
1 years general warranty
5 years on motor warranty

RM1,120.00

**Features**
.Japanese Standard Quality (Environment-Friendly Design)
.Reliable, Long-Lasting Safety (Reliable, Advanced Motor)
.Constant Water Pressure (Life-Extending Pressure-Stabilized Unit)
.Big Water Capacity (Increased by up to max. 22%)
.Quiet Operation (Reduced by up to max. 10dB)

**Specifications**
Brand Hitachi
Series Compact Type
Model WM-P150XS
Motor Watt 150W
Total Suction Head 8m
Total Discharge Head 13m)
Capacity 37L/min
Max. Capacity 50L/min
Pressure Switch (On: 1.4kg/cm2 / Off: 1.8kg/cm2)
Suction Pipe 25mm (1-inch)
Noise Level 49dB
Discharge Pipe 25mm (1-inch)
Taps Used Simultaneously (4-5 Average)
Elevation Difference 2m
Dimensions W354 × L312 × H320mm
Net Weight 13kg
Gross Weight 14kg
1 years general warranty
5 years on motor warranty

RM920.00

Fast and quality trimming is in your hand!
.Routing quality always under control
.Fast trimming
.Operation comfort

**Tool features**
.Motor power update 550 W
.Robust clamping of the base
.Slim housing with softgrip

**Technical data**
Rated input power 550 W
No-load speed 33000 rpm
Weight 1.4 kg
Collet diameter 6 mm

**Scope of delivery**
Details for GKF 550 Professional
0 601 6A0 0L0 comes complete with:
Parallel guide
Roller guide
Template guide
17 mm spanner
10 mm spanner
1 x Straight Bit

RM299.00

**Features**
.Includes 210mm x 25.4mm x 24-Tooth wood cutting saw blade
.Sawdust collector
.Saw head tilt-able to the left for miter cuts
.Integrated handle and reinforced aluminum base
.Warranty 6 months

**Specifications**
Brand Humhon
Model CM-8G
Voltage 240V 50Hz 1-phase
Saw diameter 8-inch / 200mm
Power 1250W
No-load speed 4500rpm
Bevel cutting angle 0-45º
Maximum cut at 90° : 50 x 120mm
Maximum cut at 45° : 30 x 80mm
Weight 6kg
Warranty 6 months

RM280.00

**Advantages**
- 3 functions. Gas or gasless MIG, MMA, TIG 
- Easy operation and monitoring 
 -Unique structure design, portable and lightweight easy to move
- With advanced inverter technology, saving energy and high welding quality
- Arc stability with low spatter, suitable for thin plate welding
- Auto protected for over-voltage, over-heat, over-current
- Continuous adjustment function for welding current & voltage
- Digital display, arc characteristic adjustable

**Specification**
Brand Kende
Model MIG 210TI/CS
Input voltage (V) : 1 Phase AC240V+15%
Frequency (Hz) : 50 
Rate input current (KVA) : 6.2
No-load voltage (V) : 55
Output current range (A):
-MIG : 30-210A
-MMA : 30-160A
Max Electrode : 4.0mm
Duty cycle (%) : 30
No-load loss (W) : 40
Efficiency (%) : 80
Power factor : 0.73
Insulation grade : F
Housing protection grade: IP21
Weight : 8.8Kg
Warranty 6 months

**Included**
.Kende MIG 210TI inverter welding machine
.ER70S 0.8mm x 5.0kgs MIG welding wire
.MB15 x 4m MIG welding torch
.ARC electrode clamp with cable plug
.Earth clamp with cable plug
.CO2 gas regulator and hose
.CO2 gas and tank
.Hand welding face shield

RM1,199.00

The new affordable 12 V impact driver/wrench. It gives you the right power for a variety of applications.
.Reasonably priced for high efficiency
.For a variety of applications with two-speed choice for power control
.Ergonomically built for easy handling, durability and robustness

**Technical data**
Battery voltage 12.0 V
Torque, max. 100 Nm
Weight excl. battery 1.1 kg
No-load speed 1,300-2,600 rpm
Tool holder 1/4'' Hex socket
No-load speed (1st level) 0 - 1,300 rpm
No-load speed (2nd level) 0 - 2,600 rpm
Impact rate (1st level) 0 - 1,900 bpm
Impact rate (2nd level) 0 - 3,200 bpm
Bolt size M4 - M12
Screw diameter 8 mm

**Scope of delivery**
Part number: 0 601 9F0 0L6
Cordless impact driver GDR 120-LI Professional
2 x battery GBA 12V 2.0Ah
Charger GAL 12V-20 Professional
1 x screwdriver bit PH 2
Carrying case

RM459.00

Highly flexible, highly economical
.Power and flexibility within reach for screwdriving and drilling
.2-speed gearbox enables high productivity and excellent torque
.Electronic Cell Protection for longer battery life and more durability

**Technical data**
Torque (soft/hard/max.) 14/30/- Nm
No-load speed (1st gear / 2nd gear) 0 – 400 / 0 – 1,500 rpm
Weight excl. battery 0.9 kg
Battery type Lithium-ion
Max. impact rate 22,500 bpm
Chuck capacity, min./max. 0.8 / 10 mm
Torque settings 20+2
Drilling diameter :
.Max. drilling diameter in wood 20 mm
.Max. drilling diameter in steel 10 mm
.Max. drilling diameter in masonry 8 mm
Screw diameter :
.Max. screw diameter 8 mm

**Scope of delivery**
Part number: 0 601 9G8 1L0
2 x battery GBA 12V 2.0Ah
Charger GAL 1210 CV Professional
Carrying case

RM409.00

High-powered 2-in-1 for less
.Power and durability within reach for screwdriving and drilling
.2-speed gearbox enables high productivity and excellent torque
.Electronic Cell Protection for longer battery life and more durability

**Technical data**
Torque (soft/hard/max.) 14/30/- Nm
No-load speed (1st gear / 2nd gear) 0 – 400 / 0 – 1,500 rpm
Weight excl. battery 0.8 kg
Battery type Lithium-ion
Chuck capacity, min./max. 0.8 / 10 mm
Torque settings 20+1
Screw diameter : 
.Max. screw diameter 8 mm
Drilling diameter : 
.Max. drilling diameter in wood 20 mm
.Max. drilling diameter in steel 10 mm

**Scope of delivery**
Part number: 0 601 9G8 0L0
2 x battery GBA 12V 2.0Ah
Charger GAL 1210 CV Professional
Carrying case

RM359.00

**Specifications**
Brand Giant Tools
Model PJS-12V/24V
Battery capacity 72,000mAh lithium-ion battery pack
Input 13.6V/1.0A / 17.6V/1.0A
Charging time 7 hours
Output voltage 12V / 24V
Start current 1,000A
Peak current 1,500A
Operating temperature -20°C ~ 60°C
Dimension 300 x 240 x 70mm
Weight 3.65kg
Warranty 6 months

RM1,199.00

**Features**
.Non-slip foot for stable support
.Quickly folds down for easy storage and transport
.Hands-free clamping
.Lock release switch for fast clamp release
.Quick click legs- fast and safe set up and folding
.Solid steel construction provides rigidity and strength
.Tripod base for the ultimate stability
.Warranty 12 months

**Specifications**
Brand Worx
Model WU063
Clamping range 0 -940mm
Clamp force 1 ton (1,000kg)
Max. load 272kg
Footprint (folded) 773 x 350 x 336mm
Footprint (standing) 1000 x 985 x 885mm
Clamp travel - foot pedal 24mm / step
Product weight 19.00kg
Construction solid steel
Warranty 12 months

RM1,050.00

**Tool features**
.Quick-change chuck for fast changes between drilling with impact in concrete and drilling without impact in wood and metal
.Ball grommet for preventing cable breaks
.Rotating brush plate for equal power in forward and reverse rotation
.Overload clutch to protect the user and the machine
.Forward/reverse rotation for dislodging jammed drill bits
.Continuously variable speed control for clean drilling starts

**Specification**
Rated power input 800 W
Impact energy 2,7 J
Impact rate at rated speed 0 - 4000 bpm
Rated speed 0 - 900 rpm
Weight 2.9 kg
Length 407 mm
Width 83 mm
Height 210 mm
Bit holder SDS-plus
Drilling range :
.Drilling dia. concrete, hammer drill bits 4 - 26 mm
.Opt. appl. range concrete, hammer drill bits 8 - 16 mm
.Max. drilling diameter masonry, core cutters 68 mm
.Max. drilling diameter in steel 13 mm
.Max. drilling diameter in wood 30 m

**Scope of delivery**
Details for GBH 2-26 DFR Professional
0 611 254 76A comes complete with:
Depth stop 210 mm
Keyless chuck 13 mm
SDS-plus quick-change chuck
Auxiliary handle
SDS-plus flat chisel
Set of SDS-plus concrete drill bits (6, 8, 10 mm)
Carrying case

RM970.00