.Durovac 2212 is a synthetic polymer emulsion specially developed for bonding wood joints, wood bricks, veneer to plywood lamination and other wood assemblies.
.Fast setting property
.Dry film exhibits excellent flexibility and toughness
.Content Weight: 4kg

**Usage**
(a) Surface Preparation  The surface to be bonded  must be free from dust and clean. Wood with oil or grease should be cleaned with organic solvents or thinner before bonding.
(b) Application Apply an even film of Durovac 2212 with brush or machine on one surface to be bonded. Assemble together while the surface is still wet. The drying time is between 10 to 30 minutes, depends on the porosity of the surface and also the amount of adhesive applied. Once place in position apply pressure on the bond during initial setting. Bonding pressure can be applied using presses, clamps or dead loads.

**Specifications**
Brand First Rate
Model DBAF50/40
Battery voltage 18V lithium ion
Capacity 2000mAh
Firing speed average 20nails/min / Max. 60nails/min
Max. magazine capacity holds up to 100nails/staplers
Max. length of nails 50mm (gauge 18 brad nail)
Max. length of staples 40mm (gauge 18 light duty staple)
Charging time 1.0 hours
Shot/full charge 400 shots
Over dimension 285 x 274 x 96mm
Net weight 2.65kgs
Warranty 6 months

**Features**
.Transparent for Drilling Visibility
.Bosch High Quality
.Can also be used with other Drills by Holding the Attachment Manually
.No more mess when Drilling Concrete
.Works with or without vacuum

**Specifications**
BRAND BOSCH
CODE 1 600 A01 M9V
MODEL GDE 24 PROFESSIONAL
SDS PLUS : 110 – 160MM
IMPACT DRILL : 100 – 120MM
HOLE DIAMETER : 15MM

**Suitable model**
GBH 2-18, PBH-2000, PBH-2100, PBH-2500,
GBH 2-20, GBH 2-22, GBH 2-23, GBH 2-26
GSB 20-2, GSB 16, GSB 13,
GBH 3-28DRE, GBH 18V-Li, GBH 36V-Li, GBH 36VF-Li, GBH 26V-Li Compact

**Features**
Brand SELAMAT
Model 2K344-15M
Fajar Cable 1.25mm x 3 core (15 meter)
Max Load 2500 watt (10A)
4x Socket Outlets with Neon Indicator
15 Meter SIRIM Approved Cable Reel
Safety Approved by SIRIM & Suruhanjaya Tenaga (ST)
Heavy Duty with Max. Load of 2500 Watts
100% Pure Copper Cable with SIRIM Approval (1.25sqmm x 3C)
Heavy Duty Body with Fire Resistance
Special Knob for Smooth Cable Winding
Easy-Carry Handle
Made in Malaysia
Size 21cm x 27cm x 35cm
1 year warranty on manufacturing defects

Hitachi magnetic screw driver bit
PH2 driver
Length 50mm
6.35mm hex shank
Made in Taiwan

**FEATURES & BENEFITS**
.Comfortable, soft-grip handle, cap and trigger reduces hand fatigue
.Easy-slide load magazine
.Easy-jam-clear mechanism saves time and hassle
.Brad-empty indicator helps keep work flowing
.Adjust Hi/Lo power with turn of a dial
.8' (2.4mtr) cord
.Fires 5/8" to 1-1/4" (18 gauge brads)
.Warranty 12 months

**Specifications**
Brand Stanley
Model 6-TRE650
Voltage 220-240V 50Hz 5A
Brad nail type 18-Gauge
Firing speed 20 nails/min
Capacity brad nail range 5/8 inch to 1-1/4 inch (15 mm to 32 mm)
Color yellow/black
Power cord 2.4 mtr (8 feet)
Weight 2.1 kg
Dimensions 301 x 287 x 92 mm
Warranty 12 months

Stanley TRE650- Electric Nailer, offers soft grip for fatigue free working, force adjustment for perfect finishes on different materials.

**Features**

.With high visibility, it brings you strong sense of security.
.Available for shipbuilding industry, steel industry, parking lot, outdoor work and sport, etc..
.Light weight, comfortable, strong and portable.
.Easy to wear and match your different kinds of clothes.
.It's adjustable, fits most men and women with different body sizes.
.With reflective strap, even if in night, you will be seen clearly and your safety will be well protected. 

Model SV312/GN / SV314/OR
Color green or orange
Material polyester fibre
High lightness reflective strip

**Features**
Brand SELAMAT
Model 2K344-40M
Fajar Cable 1.25mm x 3 core (40 meter)
Max Load 2500 watt (10A)
4x Socket Outlets with Neon Indicator
40 Meter SIRIM Approved Cable Reel
Safety Approved by SIRIM & Suruhanjaya Tenaga (ST)
Heavy Duty with Max. Load of 2500 Watts
100% Pure Copper Cable with SIRIM Approval (1.25sqmm x 3C)
Heavy Duty Body with Fire Resistance
Special Knob for Smooth Cable Winding
Easy-Carry Handle
Made in Malaysia
Size 21cm x 27cm x 35cm
1 year warranty on manufacturing defects

**Specifications**
Brand Nikko
Model WFR-1060
Free speed 150rpm
Avg. air consumption 5cfm (141L/min)
Max. torque 45ft-lb (61Nm)
Clutch type 3 gear, planetary
Length 262mm (10.3inch)
Weight 1.23kg (2.8lbs)
Air pressure 90psi (6.3kg/cm2)
Warranty 6 months

CTA Plastiguage is often used for measuring bearing clearances between the journals on the crankshaft and the bearing surface. Essentially, the little wax strip mushrooms out as the bearing cap in installed. After removal you can measure the gap by comparing how flattened the wax strip is to the measurement tool included in the packaging. This is also great for use on basic engine rebuilds as well. Comes with 2450x01 - size: .001-.003" (green) and 2450x02 - size: .002-.006" (red) sizing.

**Features**
.Code 2450
.Size: 2 Pc. Set
.Pack Qty: One of each
.Measures clearances of engine rod and main bearings without expensive micrometers
.Helps choose the proper size replacement bearing inserts
.Sets of two sizes (.001" - .003" & .002" - .006"/.025 - .08mm & .05 -.15mm)
.Covers all auto engines
.MADE IN USA

**Specification**

Brand Okatz
Model POS110V
Rated voltage 240V
Rated frequency 50Hz
Input power 240W
Pad size 110 x 100mm
Abrasive paper size 140 x 114mm
Orbits per minute 14,500opm
Weight 1.3kg
Warranty 6 months

**Specifications**

Model WFG-1219
Free speed 10,000rpm
Air pressure 90psi (6.3kg/cm2)
Avg. air consumption 6cfm (169L/min)
Wheel diameter 4" (100mm)
Angle 90 degree
Air inlet 1/4"
Length 228mm (9.0inch)
Weight 1.78kg (3.92lbs)
Warranty 6 months

**Specifications**
Brand Prescott
Model PT5033001
Motor voltage 220-240V 50/60Hz
Power 2,000W
Knife shaft speed 8000r/min
Feed speed 6m/min
Max planing width 330mm
Planing depth 0~3mm
Planing height 6~160mm
Working table size 330 x 290mm
No. of blade 2
Dimension 53 x 70 x 40cm
Packing size 57 x 36 x 45.5cm
Net weight 28kgs
Gross weight 30kgs
Warranty 6 months

**Standard Equipment**
Hex key & open wrench
Blade gauge
4x rubber feet
Extra carbon brush
User manual
Carton box

**Specifications**
Brand Maka
Model MKL-W01
Screen display area size 35 x 29.5mm
Body size 134.5 x 60 x 25mm
The operating environment 0-40℃ humidity＜85%
Storage temperature -20-70℃
Battery 2 x 1.5 AAA batteries
Rated current ＜50mA
An alarm:
Scanning mode：Wood＞17%, Wall＞70%
Prod mode ＞17%
Prod measuring range/accuracy:
.Wood 5-50%/±2%
.Building materials 1.5-33%/±2%
Temperature 0-40℃/±2℃ (32~99℉/±4℉)
Scanning measuring range/accuracy:
.Softwood 0-53%/±4%
.Hardwood 0-35%/±4%
The relative reading value of gypsum board and masonry wall
Maximum scanning depth 20mm
Warranty 12 months

**Specification**

Brand Nikko
Model WFD-1050
Free Speed 1800rpm
Air Pressure 90psi (6.3kg/cm2)
Avg. Air Consumption 5cfm (141L/min)
Air Inlet 1/4 inch
Air Exhaust Handle
Chuck 3/8 inch (10mm)
Angle 90 degree
Length 193mm (7.6 inch)
Weight 1.16kg (2.55lb)
Made in China
Warranty 6 months

**Features**
.Brand Fulco
.Model BV-10
.Extra wide open 0~50mm (M1~M33)
.Length 10" (250mm)
.Hardness and torque meets or exceeds ANSI SPECS B107.8M
.Chrome vanadium steel
.Drop forged
.Made in Taiwan
.Limited life-time warranty

**Specifications**

Model PT3003002+
Rated voltage 220~240V 50/60Hz
Rated current 9A
Max. firing speed 20pcs/min
Staple spec. Type J Gauge 18 (Length 15~20mm)
Nail spec. Type F Gauge 18 (Length 15~32mm)
Nail magazine 100pcs
Cable length 2mtr
Packing L280 x W80 x H265mm
Weight 1.8kg
Warranty 6 months

**Features**
.Economic and popular model
.Ideal household electric pump
.High efficiency, low noise, strong and stable structure

**Specifications**
Brand Chimp
Model CSP400C-6
Voltage 240V 50Hz
Power 400W
Max. pump rate 7300L/min
Max. height 7.5m
Max. depth 7m
Max. grain size 5mm
Dia. of pipe 1" / 1-1/2"
Cable H05RN-F3G0.75mm2
Length of cable 10m
Max. water temperature 35°C
Protection class IPX8
Warranty 6 months

**Features**
.Adjustable nozzle
.High quality aluminum pot and copper nozzle
.Paint control valve, the nozzle pressure and spray shape can be adjusted
.The surface of paint sprayer body is polished and painted

**Specifications**
Brand Nikko
Model 162S
Nozzle Size 1.2mm / 1.5mm / 2.0mm
Air Consumption 12.5CFM
Flow Rate 110-220ml/min
Cup Capacity 1000ml
Working Pressure 50psi / 3.5kg/cm2
Air Intake Size G1/4″
Item Weight 450g

.Heavy duty design
.40cm hose
.Easy to read dial
.Nylon body
.Ergonomic handle for a firm grip

**Specifications**
Brand Nikko
Model TG-18
Working pressure 0-8 bar (0-115 psi)
Gauge size 70mm
Manometar dial reads 0-12 bar (0-170 psi)
Inlet 1/4"
Hose length 40cm
Warranty 6 months